Bambu Lab A1 3D Yazıcı
Bambu Lab A1 3D Yazıcı
Bambu Lab A1 3D Yazıcı
Bambu Lab A1 3D Yazıcı
Bambu Lab A1 3D Yazıcı

Bambu Lab A1 3D Yazıcı (BLA1)

Marka : Bambu Lab
Fiyat : €682,16  + KDV
KDV Dahil : €818,60

ÖN SİPARİŞ ÜRÜNÜDÜR. NİSAN AYINDA TESLİM EDİLMESİ PLANLANMAKTADIR.

İthalatta yaşanabilecek gecikmelerden firmamız sorumlu değildir.

ÖN SİPARİŞ ÜRÜNÜDÜR. NİSAN AYINDA TESLİM EDİLMESİ PLANLANMAKTADIR.

 

Bambu Lab A1 3D Yazıcı

Bambu Lab A1 Combo

  • Multi-Color Printing
  • Full-auto Calibration
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 Tech Specs

Item A1 Specification
Body Build Volume(W*D*H) 256*256*256 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included)
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build Plate Temperature 100°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10m/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer
Not Recommended
Sensors Chamber Monitoring Camera Low Frame Rate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 : 385*410*430 mm³ , Package size : 552*532*320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg
A1 Combo : Package size 546*536*420 mm³ , Gross weight (AMS lite included) 14.3 kg
 

What's in the box

 

Bambu Lab A1

Spool Holder

Purge Wiper

Build Plate

PTFE Tube*1

Bambu Filament Samples (Random Color)

Stainless Steel Nozzle(pre-installed)

Accessory Box

cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR