Porima PLA Wood Filaments, thanks to the real wood reinforcement materials it contains; It allows printing products with higher resolution, lighter weight and higher thermal properties than standard PLA filaments. It contains 30% filling that you can print with real wood texture.
Extruder Temperature
180-230°C
Does not require special "Hot-end"
Bed Temperature
60-75°C
Can be turned off optionally
Nozzle Specs
0,4 mm nozzle
Standard brass can be preferred
Cooling Specs
Fan Speed: 100%
Cooling fan required
Drying Specs
50°C for 4 hours
Maximum value when needed
Heated Chamber
Suitable for open printers,
Does not require a closed or heated chamber
NOTE:
There may be a risk of nozzle clogging due to the wooden reinforcements in it, therefore it is recommended to use 0.4 mm and above nozzles.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.