Porima PETG Filaments is a versatile filament with high temperature resistance, excellent chemical resistance and impact resistance. Thanks to its properties, it can be used industrially in the production of end products.
Extruder Temperature
230-260°C
Does not require special "Hot-end"
Bed Temperature
70-100°C
Can be turned off optionally
Nozzle Specs
0,4 mm nozzle
Standard brass can be preferred
Cooling Specs
Fan Speed: 100%
Cooling fan required
Drying Specs
50°C for 4 hours
Maximum value when needed
Heated Chamber
Suitable for open printers,
Does not require a closed or heated chamber
NOTE:
Due to its high fluidity structure, stringing may occur when printing detailed models. Stringing can be avoided by optimizing the retraction setting in the slicing program.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.